Lin Quan Terminal Both-end Crimping Machine For Low Voltage Wire Harness
Equipment Configuration
With the German high pixel CCD inspection system.
The maximum productivity can reach to 1200pcs/hr.
Equipment Function
Wire selector up to 12 different specifications and colors of wires.
CCD visual inspection, CFM (Crimping Force Monitoring), Insertion/Pull-back force detection.
Both-end terminal stripping, Sigle-end housing Insertion.
Simultaneous multiple housing insertion.
Connector bowl feeding/Robotic arm feeding.
Feature
1. Built-in frequency converter, high productivity and low noise.
2. Crimping die designed according to your terminal.
3. The production speed is adjustable.
4. Support manual mode and automatic mode, easy to replace.
5. LED displays the number of crimp terminals.
6. Crimp presses that require different crimping forces for different wire sizes and terminal thicknesses.
Technical Parameters
| Wire Cross-section |
0.13-4.0mm2(AWG26-14) |
| Mould Assembly Type |
AS40, AS42, AE30(Pneumatic mould can be customized) |
| Wire Cutting Length |
60-9999mm |
| Penetraction Depth |
Maximum 3mm |
| Crimping Capacity |
3 TON presser |
| Power Source |
China - 380V / 3 Phase / 50 Hz
Canada - 600V / 3 Phase / 60 Hz
USA/Japan - 480V / 3 Phase / 60 Hz
Mexico/Honduras - 480V / 3 Phase / 60 Hz
Europe - 400V / 3 Phase / 50 Hz |
| Power |
7.5KW |
| Compressed Air |
0.5Mpa |
| Equipment Size |
L3020*W1550*H1900mm |
| Weight |
1000KG |
| Stripping Length |
Full strip: 0-15mm
Half strip: 0-15mm |
| Cutting Precision |
Cutting length*0.02mm |
| QC Devices |
CCD inspection modules, Crimping Force Monitoring (Force sensor),Insertion/Pull-back Force Monitoring (Force sensor), Terminal crimped height measuring instrument, Terminal pull force measuring instrument |
| QC Contents |
Wire presence, Wire overload, Terminal presence, Terminal overload, Stripping and crimping visual monitoring, Crimping force monitoring, Insertion & pull-back force monitoring |
| Efficiency |
Single-end crimping and insertion about 1200pcs/hr (Depends on different producing process and the functional module quantity, productivity is different) |
| Function |
Pre-feeding, Wire feeding, Fixed length cutting, Stripping, Both-end crimping, Single-end insertion, Adjusting crimp height on HMI, Unloading defective products through CCD inspection |
