Equipment Overview
1. It is mainly used for automatic high-voltage cable processing, which can complete the functions of wire feeding, peeling, weaving net,
copper close-loop crimping, inner core peeling, waterproof plug, terminal crimping, sheath and so on.
2, The whole machine adopts PLC bus control communication and a full servo power system, which guarantees stable performance.
3, Touch screen operation. All processing parameters can be saved and production content can be edited and sent upon request.
4, With imported servo motor and CCD visual detection function, it gives you real-time monitoring of the process quality to ensure product
yield.
5, The machine adopts high precision servo motors and PM-01 pressure management system, high precision and strong stability, and real-time monitoring of the process.

Technical Parameters

Function	Wire feeding, peeling, cutting shielding mesh, cutting aluminum foil, wearing metal ring, crimping metal ring, stripping the inner skin, crimping,insertion, covering the rubber shell	Production rate	Less 18 sec per single-terminal
Crimping Capacity	10 tons and15 Tons Servo motor with mute specification (Customized according to the requirements of products)	Block Feed	Linear-carrier housing transferring/ Plate-loop conveying housing feeding module (According to customer requirements)
Wire Range	2.5 – 16 mm² (AWG 14 – 5)	Process Monitoring (integrated)	CCD Terminal Detection Crimping Force Monitoring Insertion Force Monitoring
Feeding Wire Length	600-9999mm	Electrical Connection	3 phase/380v/50HZ(machine comes with a transformer)
Outer Skin Cutting	0-60mm, stripping precision ±0.5mm can be full stripping and half stripping; The cutting precision is 0.05mm	Power	25KW
Laser stripping aluminum foil	3-50mm, the residual length of 1 circle of aluminum foil is less than the thickness of the outer insulation layer, the residual size of sharp corner is much less than or equal to 4.5mm, and the reducing accuracy is ±1mm, which does no longer harm the woven net and insulation layer	Compressed Air	0.5-0.7Map
Screening Can Cutting	5-55mm, cutting accuracy ±0.4mm	Efficiency	200pcs/hr(According to the different processing conditions, the speed will be different)
Screening Can Reversal	5-20mm	Quality Assurance	Pull force Height Crimp-height Measurement Seal Module RXM Linquan MES System Laser Inkjet Print Tinning Twisting Stranded Wire
Inner Skin Cutting	0-55mm, stripping precision ±0.5mm can be full stripping and half stripping; The cutting precision ±0.05mm	Quality Assurance

The KYLIN series is particularly designed for high voltage Harness production. Can produce varieties of high
voltage harnesses of varying tiers of complexity.
It has the features of both-end measuring, cutting, both-end striping, both-end crimping, inner and outer
skin cutting, Screening can cutting, Screening can reversal, both-end Insertion and so on. lessen manufacturing
time extensively.
these machines make it possible to manufacture a variety of high voltage harnesses. substantially saving labour price.

Precision transmission and alignment
Professional high-voltage line transmission module, to achieve precise transmission of different specifications of high-voltage wire.
During transmission, the wire is straightened synchronously to make its transmission smoother and more accurate.

Automated inkjet printers mark the wires
The marked wires are picked up by a shuttle system and guided in loops to the processing machines.
Continuous data flow and traceability production data can be sent directly to the machine via a network. The quality data from the
production process is saved for each wire harness, and traceability is guaranteed at all times.

Cutting Precision
It is based on a capacitive measuring principle, is integrated into the blade holder and can be operated using any standard stripping
blade.
The sensitivity of the monitoring can be configured using setting parameters.
Defective wire ends are detected automatically and rejected.
Cutting length shorter than 600mm, error range 0.5mm+

Self-Developed Crimping Head
Pass CPA+ pressure stability test CMK can reach to 4.0 or higher,far higher than the industry standard 1.6(Detailed data reports
can be provided)
Higher stability and accuracy
Adjust height on touchscreen
The crimping machine head,Laser stripping aluminum foil, Screening Can cutting and can be added according to customers need.
The equipment is modular and can be matched according to product types.

Self-Developed CCD Visual Inspection
CCD Visual Inspection detects the Coreless crimping, Crimping without stripping, Deep and shallow crimping, Core wire splay, Half
packing of the insulation layer and providing alarm.
Core Wire Online Inspection System
Detect the Copper Wire Inspection Number and Stripping Length Inspection and provide alarm.
Self-Developed Online Pressure Inspection
Detect the Terminal Presence, Deep or shallow crimping and Coreless crimping and provide alarm.